Machinery & plant engineering
Machine builders need an electrical and automation partner who keeps pace with mechanical design — panel by panel, revision by revision. GANI has delivered for this sector across control cabinets, harnessing and commissioning-ready automation.
- Control panels
- Harness sets
- Turnkey automation
- Retrofit
The bar, as your buyers set it.
Panels and harnesses that track fast-moving mechanical revisions
Documentation that supports CE conformity of the finished machine
Reliable series supply once a machine goes into repeat build
Our work in machinery & plant engineering.
Delivered in machinery & plant engineering.
A selection from the program archive. Customer names are shared under NDA.
- 01Control package for CNC grinding platformENGINEERING
Electrical design in EPLAN plus PLC/HMI software for a grinding-machine platform, delivered per machine with a standardized cabinet layout.
- 02Panel series for injection-molding OEMMANUFACTURING
IEC 61439 panel series for an injection-molding machine builder, each cabinet 100% tested and shipped with its as-built documentation set.
- 03Retrofit of a five-axis machining centerLIFECYCLE
Drive and control retrofit of an aging five-axis machining center, replacing obsolete servo hardware while preserving the mechanical envelope.
- 04Box-build for laser-marking stationsMANUFACTURING
Full box-build of laser-marking stations for a machine-builder OEM, from frame wiring to functional test against golden samples.
- 05Palletizing cell for packaging-machine trialsENGINEERING
Turnkey robotic palletizing cell with gripper tooling, safety fencing and PLC/HMI package, accepted through combined FAT and on-site SAT.
- 06Operator consoles for press-brake familyCONTRACT MANUFACTURING
Standardized operator console family for press brakes, produced in variants with common HMI hardware and pre-tested cable sets.
- 07Harnesses for textile-machine drive unitsMANUFACTURING
Drive-unit harness families for a textile-machinery builder, built to released drawings, 100% tested and delivered in line-side kits.
- 08NPI transfer of a compressor control cabinetMANUFACTURING
New-product introduction of a compressor control cabinet, aligning BOM, golden samples and test protocol before handing over to series.
- 09Test-field expansion for gearbox rigsENGINEERING
Two additional gearbox test rigs cloned from the existing field, with shared HMI standards and extended data-logging infrastructure.
- 10Remote-diagnostics rollout for machine fleetLIFECYCLE
Fleet-wide rollout of secure remote diagnostics for installed machines, including gateway cabinets, access policy and spares-aware maintenance planning.
- 11Safety re-engineering for legacy press lineLIFECYCLE
Safety-circuit re-engineering of a legacy press line, updating light curtains, safety PLC logic and the EPLAN documentation to current practice.
- 12Subassembly line for pump skidsMANUFACTURING
Contract subassembly of pump skids covering wiring, piping-adjacent instrumentation hookup and end-of-line functional test with serial traceability.
- 13Feeder subsystem for assembly automation OEMENGINEERING
Vibratory feeding and escapement subsystem with its own PLC island, integrated into the OEM’s master control via profinet handshake.
The three routes most programs in this sector take — each with its scope, its standards and a delivered case.