Textile machinery
GANI is at home in one of Europe’s densest textile regions, and we build for the machinery that drives it. Textile production rewards uptime above all — so we focus on automation, panels and retrofits that keep machines running around the clock.
- Machine electrics
- Operator panels
- Retrofit
The bar, as your buyers set it.
Around-the-clock uptime on continuous production machinery
Retrofit paths that modernize installed machines economically
Local, responsive electrical and automation support
Our work in textile machinery.
Delivered in textile machinery.
A selection from the program archive. Customer names are shared under NDA.
- 01Dyehouse PLC fleet migrationENGINEERING
Dyeing-machine controls migrated across a dyehouse for a fabric finisher, machine by machine, with converted recipes and stepwise SAT.
- 02Loom drive retrofit wavesLIFECYCLE
Aging weaving-loom drives replaced in planned waves for a denim mill, keeping production running on the remaining loom park.
- 03Stenter line SCADA upgradeENGINEERING
Stenter frames connected to a plant SCADA for a finishing house, adding recipe download, alarm history and shift reporting.
- 04Spinning frame panel refurbishmentLIFECYCLE
Ring-spinning control panels refurbished on a rolling schedule for a yarn producer, with redrawn EPLAN documentation and refreshed spares packages.
- 05Nonwoven line control systemENGINEERING
PLC, drives and HMI for the winding section of a nonwoven line builder, tested at FAT against simulated line signals.
- 06Knitting machine harness seriesCONTRACT MANUFACTURING
Sensor and actuator harnesses for a circular-knitting OEM, 100% tested and delivered kitted per machine build number.
- 07Fabric inspection camera retrofitLIFECYCLE
Camera-based inspection stations retrofitted onto rolling tables for a home-textile mill, integrated into existing PLC stop logic.
- 08Yarn conditioning autoclave controlsENGINEERING
Autoclave sequencing rebuilt on a modern PLC for a yarn plant, preserving validated steam profiles and adding HMI trend recording.
- 09Texturizing hall energy monitoringENGINEERING
Per-machine energy metering rolled out across a texturizing hall, aggregated in SCADA for load and idle-time analysis.
- 10Warping section obsolescence planLIFECYCLE
Obsolescence assessment of warping and sizing controls for a weaving mill, delivering a phased retrofit roadmap and last-time-buy list.
- 11Dye-kitchen dosing panelsMANUFACTURING
Chemically resistant dosing-control panels for a dye-kitchen equipment maker, built in batches from shared EPLAN masters with full test records.
- 12Finishing line safety re-engineeringLIFECYCLE
Safety circuits on calender and sanforizing lines re-engineered for a finishing plant, documented per machine and validated in production pauses.
- 13Airjet loom spares programLIFECYCLE
Structured spares program for airjet loom electronics at a technical-textiles weaver, combining repair services, exchange stock and obsolescence tracking.
The three routes most programs in this sector take — each with its scope, its standards and a delivered case.