# 4-axis torque-controlled plate tightening press

> Automatic station that tightens four axes independently with full torque traceability and separate load and unload stations to cut standstill time.

Page: https://ganiindustrial.com/projects/four-axis-torque-plate · Language: en

Where a plate is fastened at four points, the four cannot simply be tightened to the same number and forgotten. They interact: tightening one changes the load at the others, and a plate that ends up unevenly clamped will fret or leak long before its fasteners fail.

This station tightens all four axes independently through a torque controller, so each axis gets its own controlled result rather than a shared best guess. Every tightening is recorded, and the record is written into the customer ERP against the part — which is what turns a torque figure into traceability.

Loading and unloading happen at separate stations from the tightening, so the press is not idle while a part is being handled. For a plant that has to prove a joint years after it shipped, the record is worth as much as the cycle time.

## Key features

- Four independently tightened axes
- Torque controller integration
- ERP integration for the tightening record
- Separate loading and unloading stations


---

GANI Industrial — engineering, manufacturing and lifecycle for European OEMs. Bursa, Türkiye.
Site index: https://ganiindustrial.com/llms.txt