# Closing press

> Press that lifts the product to the working height and closes it circumferentially with a jaw group, so the closing operation repeats part after part.

Page: https://ganiindustrial.com/projects/closing-press · Language: en

Closing a cylindrical product means applying force around its whole circumference at once. Do it in sequence and the part deforms; do it unevenly and the seal leaks. The operation is simple to describe and difficult to repeat by hand.

The press lifts the product to working height on elevator cylinders, then closes it circumferentially with a jaw group. Because both the height and the closing are machine motions, the same geometry is produced part after part rather than depending on how the product was presented.

That repeatability is the deliverable. A closing operation that varies is not a cosmetic problem — it is a leak rate, and a leak rate is a warranty cost that appears months after the parts have shipped.

## Key features

- Elevator-based product positioning
- Elevator cylinders
- Jaw cylinders for circumferential closing
- Repeatable closing operation


---

GANI Industrial — engineering, manufacturing and lifecycle for European OEMs. Bursa, Türkiye.
Site index: https://ganiindustrial.com/llms.txt